対応機種 | 携帯電話 |
---|---|
カラー | Glas.t R |
電池付属 | いいえ |
電池使用 | いいえ |
ブランド名 | Spigen |
メーカー | SPIGEN SGP |
製品型番 | SGP09548 |
発売年 | 2014 |
その他 機能 | 9 H |
サイズ | iPhone5 |
製品サイズ | 10.8 x 1.91 x 16.51 cm; 58.97 g |
【国内正規代理店品】SPIGEN SGP iPhone5 シュタインハイル GLAS.t R プレミアム リアル スクリーン プロテクター 《強化ガラス液晶保護フィルム》 【SGP09548】
ブランド | Spigen |
対応デバイス | 携帯電話 |
商品の硬度 | 9H |
対応電話モデル | Iphone 5 |
特徴 | 9 H |
メーカー | SPIGEN SGP |
この商品について
- iPhone5対応
- メーカー型番 : SGP09435
- 本体サイズ(mm) : 55(W) x 121(L) x 0.4(H)
- 重量 : 9g
- 表面強度 : 8~9H
- Designed by SPIGEN SGP in California USA.
- Made in KOREA.
- 【正規品】シリアルナンバー 同梱
- 付属品 : クリーニングクロス / アルコールクリーニングパッド
アマゾンに買い物に訪れる何億人ものお客様にご自身のブランドの商品をお届けいただけます。 FBAなら配送からカスタマーサービスまでアマゾンにおまかせ。 今なら新規出品者様向け特典で最大787.5万円還元 Amazonで販売を開始する
他のカスタマーはこれらの商品も見ています
商品の情報
詳細情報
登録情報
商品モデル番号 | SGP09548 |
---|---|
ASIN | B009M9URB2 |
発売日 | 2012/10/25 |
Amazon.co.jp での取り扱い開始日 | 2012/10/22 |
おすすめ度 |
5つ星のうち3.6 |
保証とサポート
ご意見ご要望
特定の情報をお探しですか?
商品の説明
【GLAS.tR】
GLAS.t Rは強化ガラスの保護力に加えてラウンド加工を施すことで、よりグリップ感やデザインに一体感を持たせることのできるGRAS.tシリーズのハイグレードモデルです。
【全体の透明性】
GLAS.t Rは薄さ0.55ミリの透明な強化ガラスで作られていますので、ディスプレイの美しさを損なうことはありません。
【表面強度8~9】
GLAS.t Rの表面は、通常のPETフィルムより三倍強い8-9Hの硬度を持っています。そのためナイフや鍵といった鋭利なものとの摩擦でもGLAS.tRを傷つけることはありません。
【撥油コーティング&繊細なタッチ】
GLAS.t Rは油分をはじくコーティング加工をされているので、汚れがこびりつきにくいという特徴を持っています。
また、GLAS.t Rは特殊なシリコン粘着材を使用しているので、取り付けが簡単なだけでなくスクリーンの感度に影響を与えません。
【飛散防止】
過度な圧力等により万一割れてしまった場合でも、細かい破片になり尖らない特性があるので、一般的なガラス製品よりも安全です。
※一度はがしたGLASの再利用は粘着性が弱くなるためお勧め致しません。また、GLASを外す時には機器本体を傷つける場合があるので無理な力はかけないようにしてください。
-
トップレビュー
上位レビュー、対象国: 日本
レビューのフィルタリング中に問題が発生しました。後でもう一度試してください。
ボタンの穴の大きさがほぼボタンの大きさと同じなのでずれることが許されない。
付属のボタンシールもボタンの大きさと全く変わらないので、これもずれる事が許されない。
ピンセットを使い慎重にズレをなくしてセットしたにも関わらず、ボタンを押した感触に引っ掛かりを感じ、片押し状態になってしまう。
その割に、外周の大きさは両サイド上下で1mm以上のスペースがある、タイトなのでiPhon5側の角に合わせてガラスを落とそうと練習したら盛大にズレたので、こりゃだめだってことになった。
まぁ・・・大雑把な外国人が作るとこんなんになるんだろうなぁって感じの典型的な商品だね。
同じコンセプトで高くなってもいいから、日本人が設計して作ってくれないかなぁと思う。
ガラス面の強度はなかなかのもんです。皮脂が付かないのと、付いてもティッシュでさっと綺麗に拭き取れちゃうのがいいですね。
これにする前は、すぐ皮脂でドロドロになって、眼鏡ふきで時間をかけて磨かないときれいにならなかったから。
この表面加工技術はすごいので、ぜひともメガネのレンズに同じ加工できればなぁと思いました。
厚みとボタン周りのタイトさ、外周の小ささが改善されれば星5にできます。
ホコリについては付属品を使わずに、ホコリの少ない場所で眼鏡ふきを使って丁寧に拭き取っていけば、完全に除去できます。
貼り付けはボタン回りのタイトさがふざけんな状態なので、3回貼り直してやっと成功って感じです、それでも片押しの違和感が残りましたが、これはボタンシールのせいなので。
貼り直しも完全に密着させる前なら簡単に剥がせますよ、おくすることなくやっちゃってください。
早速装着して、滑らかさににんまりしています。
滑らかさについてはいうことありません。
映り具合もきれいで、傷一つありませんでした。
0.4ミリというのは薄いようでいて、それなりに厚みがありますが
ケースをするのに支障があるほどではありません。
手帳型のケースを使っており、蓋もきちんと閉めることが出来るので
厚さに関してはさほど問題にはならないと思います。
ただ、ケースによってはアイフォンの表側をかっちりホールドするタイプもあると思うので
その辺の干渉については、実際にはめてみないとわからないかもしれません。
ホームボタンのへこみ具合は、押しにくいこともなく、これも問題なし。
四色のホームボタンがついていたので、気分やケースの色に合わせてつけたい方は
付けていいんじゃないでしょうか。
サイズはジャストよりも心持ち小さ目かなという感じなので
大幅に食い込むケースでない限りは大丈夫のような気はします。
重さは…感じる人には感じるんじゃないかなと思います。
特に、保護フィルムだけでカバーをつけていない人には、多少でも重さの違いは感じられるかと。
ケースの重さに慣れてしまっていれば、さほど気になるものではないと思います。
貼りにくいかどうかについて言えば、私は簡単に貼れました。
一番悩んだのは、保護フィルムの保護フィルムを剥がす順番で、
これさえ確認できれば、あとは位置を合わせて上からポトンと落とすだけで
自分からしっかりとアイフォンのガラス面に吸着をしてくれ、端の方の浮いているところを
ちょっと抑えるだけで完了。
片側のフィルム外して位置合わせ
→trの端を両手で持ってスタンバイ
→高さ1センチくらいのところで目測で穴合わせ
→上から落として出来上がり
こんな感じでした。参考までに。
商品は大変レベル高くこの商品以上のレベルのものはそう見つからないかと思います。
しかし、一つだけ問題点があります。
それは貼り付けの際の技術性の難しさです。
当方は結局2枚を購入しましたが…
結局納得いく仕上がりには至っていません。
絶対に一度限りで貼り付けを完了しないと上手く貼れません。
貼り直しは絶対にうまく行きません。
とにかく埃のない静かな時に作業しないと上手く行きません。
しかし上手く行くとこれ以上ない仕上がりで他には無い商品価値があるかと思います。
結局、3枚目を購入することになりそうです。
完璧主義者の方にはお勧めです!
何とか貼り付けできましたが
貼り付けが難しく角に埃が混入しました。
貼り直すほど埃の混入や粘着が弱くなる可能性がある為、貼り直しは困難です。
失敗すれば数千円はドブに捨てる事になります。
値段がもう少し安ければ買いなおすんですが…
あとフィルムは無事でしたが、箱の中に大量に粉?のような物が入っています。
値段と謎の粉の為星3つにさせてもらいましす。
二週間程でヌルヌル感は落ちてきますが、只のガラスよりは全然滑らかです。フッ素加工がしてあるのでしょう。
角がR加工されているので格好もいいです!
ブログ等では何故だか(ヤラセ?)防傷に対して高評価のこの商品ですが、キズは普通に付きます。
高度が9Hと唱っていますが、一緒にダイヤやサファイヤなんか持ち歩いていませんが、
貼って1週間で傷だらけになりました。
今回貼るのは3枚目(GLAS.tR SLIMで)になりますが、それまでのものも傷が付いており、
余程硬いものが運悪く接触したのだろうと思って諦めていました。
があまりにもすぐに傷がつくので検証してみました。
車の鍵:擦っても傷つきません
100円玉:擦っても傷つきません
ハサミ:うっすらと跡が残ります。引っ掻いた筋の通りに残り、拭いてもとれません
カッター:よくあるブログのようにカンカン叩いても傷はつきませんが、引っ掻くとハッキリ傷がつきます。
爪でなぞると引っかかるレベルの傷です。100均のカッターの刃です。
リングストラップ:SmartRingのラバー塗料が剥げてしまった部分で擦ると、一気に傷だらけです。
防御力0です。
ジーパンのリベット:ポケットに入れる時に上部のリベットに当たっていたようです。
普通に爪で引っかかる傷が入ります。
テーブルの天板:密着させて、軽く擦ると端の方に無数に拭いても取れない程度の傷がつきます。
砂地:傷だらけです。防御力0です。
よくわかりませんが、モース硬度では計りきれない何かがあるのでしょうか???もしくは9Hとはオリジナル基準?
※ふと思い立ち、鏡のガラスでも同様に試してみた所、ほぼ同じ結果でした。
普通のガラスにフッ素加工をしているが為に、滑りが良くなっているので、その分傷がつきにくい。
ということではないかと思い、
これも検証の為にスマホ用のフッ素を購入し、鏡に使用してみた所、
感覚的には全く同じでした!!!
以上の結果から、「表面は普通のガラス。」と思っていいと思います。
無茶をしたり、フッ素効果が無くなる程使用しなければ、普通の保護フィルムよりは傷はつきにくいでしょう。
他の国からのトップレビュー
La vitre était de très bonne qualité mais je l'avais choisi pour sa finesse.
Cette ancienne vitre s'est écaillée au premier choc (sans coque protectrice).
Celle ci est très résistante et de plus, elle est traitée à [insérer nom scientifique du produit] ce qui la rend très douce et glissante ce qui est très agréable.
Les bords du vert sont arrondis (comme sur l'iphone 6).
Aucune perte de lumière ou de tactile.
Je conseille de porter également une coque ou du moins un bumper.
Installée depuis plus de 6 mois, je suis satisfait à 100%
Je recommande fortement!
I have never been a big fan of putting cases on my iPhone, my 3G went case-less with out disaster and same was my intention with my iPhone 4 when I first got it. To spite the improvement in the hardness of the glass and likely through fluke luck I scratched the front of my iPhone 4 the second day I had it, Im still not sure how. Anyway with my iPhone 5 set to arrive I had to take another hard look at how I was going to protect this thing.
After the scratch incident I purchased an Otter Box Defender OtterBox Defender Series Hybrid Case & Holster for iPhone 4 & 4S - Retail Packaging - Black series case for my iPhone 4. While it does do a great job of protecting the case, it had four major flaws. Firstly I didn't use the belt clip, it looks ridiculous. As such I was frequently putting the phone in and out of my pocket. The silicone outer case is very grabby and over a very short period of time it stretched out. Otter replaced it, but it happened again. I wasn't going to go through the hassle of replacing the silicone every month. Secondly was the touch screen cover. While its nice that it is water proof and scratch resistant it still doesn't feel like glass. While it was ok to work with it occasionally developed an oil slick like coating between itself and the screen. I think this often happened because the Otter Box Defender would also fill with dust, badly. I had to clean it very frequently to keep the dust out. Im sure over time the dust could have lead to scratches if I wasn't diligent. Lastly the ports on the Otter Box Defender series had issues where it frequently wouldn't allow certain plugs in, which in many cases led me to taking the case off. Lastly, the Otter Box made the phone HUGE. Anyway, after the last silicone outer stretched beyond my tolerable limit, the Defender went in the junk drawer. I should note that my buddy picked up a Otter Box Defender for the iPhone 5 OtterBox Defender Series Case for iPhone 5 - Retail Packaging - Black . The silicone is of a much different, less grabby and stretchy, looks like a much better design.
Anyway after the very expensive disaster with the Otterbox Defender I still wanted to put something on my iPhone 4. I found the Spigen Glas.t SPIGEN SGP iPhone 4 / 4S Screen Protector GLAS.t Premium Tempered Glass Cover Film Shield which had rave reviews. I installed it and I must say it was the best screen protector I have ever used. I combined that with a Spec Candy Shell for the iPhone 4 Speck Products CandyShell Glossy Case for iPhone 4/4S - 1 Pack - Carrying Case - Retail Packaging - Black/Dark Grey as the raised glass had, not really sharp, but harder edges and I wanted them to feel smoother against my hand and not have it chip as Spigen suggested the could if left exposed. I liked this combination with two exceptions. Thickness and the returning issue of ports being accessible.
Fast forward to 2012 and waiting delivery of my iPhone 5. I decided that with this phone I would go white, all my other phones having been black. I also decided that drop protection was not my primary concern. My parents were lucky enough to find two iPhones the day of the release and they had them Ghost Armored at a booth in their mall. My father just had the plain clear placed on his phone, my mother had a carbon fibre thing placed on hers. I was disappointed in several things with the Ghost Armor. Firstly, the screen just doesn't feel like glass. While I didn't notice any "orange peel" that some people complain about with skins it just wasn't the same to use. Secondly the carbon fibre and clear sides are several smaller pieces that just stop and then start again around the buttons. I would have much preferred for this to be a continuous stip. I found the back looked fantastic. So with my phone I knew two things. One I did not want to use a "film" or "skin" on my screen, and two I wanted a glass touch screen again.
SPIGEN has released a new version of its Glas.t, now referred to as the Glas.tr SPIGEN SGP iPhone 5 Screen Protector Glass [GLAS.tR] Rounded Edges Glass Screen Protector Anti Chip . This is an improvement over the previous one as the edges are now rounded and don't feel as "sharp" as the previous versions. I also felt that this was less likely to chip and as such it could be used with out a case. That was my screen protector solved, the only down side was the $38.00 price tag (ouch).
OK... Price not withstanding this is simply THE BEST screen protector made for the iPhone. Other people may want to look at the Bodyguardz Pure. The initial price is the same (ok 5 bucks more) BUT they claim to offer discounted replacements. With that said I NEVER had a issue with my iPhone 4 Glas.t and I dont expect to ever need to replace my Glas.tr (YMMV). This screen protector comes very well packaged with clear instructions and everything you need in the box. This is my fourth Glas.t install having done my phone, my girlfriends and another friends prior to this. These are super easy to do, though with experience everything becomes a little bit easier. One thing I will say is that the instructions say to push down from the centre. In my experience you also want to make an effort to get to the corners of the Glas.t as the glue "expands" outwards. Sometimes they may stop a little bit short. My first one ever ended up with a series of bubbles in the top left. It did not cause the screen to lift as the outward most part had still laid down, it wasn't on the screen so I didn't care but its something to keep in mind.
The rounded corners on the Glas.tr are quite nice and just make an already amazing product that much better. After around 6 months I notice that the oleophobic coating begins to diminish. I use rain-x 3.5 oz. Rain-X Water Repellant (always the little bottle never the spray ones) and it is as good as new again. Couldn't be happier with the Spigen Glas.tr unless it was free!
Next I wanted to preserve the back of the iPhone 5, I LOVE the way it looks. I wanted a name brand skin for the back and I wanted a good deal, enter the Skinomi iPhone 5 kit Skinomi TechSkin - Apple iPhone 5 Screen Protector Ultra Clear Shield , Full Body Protective Skin , AT&T, Sprint, Verizon Wireless . I picked this one as it was $6.50 shipped. The kit came with a "full body protector" but like the Ghost Armour my parents got the sides were a series of pieces of skin rather than one continuous piece with button cut outs. It also came with a screen protector, but I will never use it. The back went on very easily. The instructions are excellent, the packaging is great and overall it is fantastic. As of now I have no bubbles, but one area where the plastic (glass?) meets the aluminum that appears to have a pool. I have used several of the skins before on other things (palms back in the day, cameras for scratch proofing etc). Skinomi is better than most and I would for sure use them again. With that said I wist they would sell things more in kits, you can only purchase the front or the whole kit. It would be nice to just be able to buy the back, or just the sides, particularly if one piece gets damaged and needs replacing. Overall for $6.50 delivered its really good. Im happy with it.
For the sides I found a company called iCarbons (icrabons.com). The do not sell on Amazon, but I took the risk an ordered from their web page. They sell all of their kits in pieces, so you can get just a back or just the side. They also sell multiple colors and textures. Since I really wanted to preserve the look of the iPhone I went with their brushed metal one piece side. It was very easy to install and while not an exact match to the flat metal on the side of the iPhone its close enough for me.
Over all Im very happy with my "protection package" that I parted together for the iPhone 5.
Ho dimostrato ad amici che anche passandoci sopra con delle chiavi non si graffia, la trasparenza è assoluta, aumenta leggermente lo spessore del telefono, ma è una cosa irrisoria, per chi come me tiene il telefono in tasca con chiavi, monete o simili è l'ideale, Soldi spesi bene.
It is totally optically clear unlike the films so you get none of the 'rainbow' effect that the films can cause and no pixellation at all.
The protector feels great to use as it is glass and has rounded, smoothed edges to give a better feel, plus it is also fingerprint resistant (NOT proof!) and easy to clean too.
You do need to be careful when installing as this is NOT a remove and re-install protector, but just taking a little extra care will make sure you have a perfectly installed screen protector that will live up to the quality of the iPhone itself for years to come.
The only slight issue is the fact that the thickness of the protector (0.4mm) means that the phone's home button is slightly recessed, however they do provide a range of coloured gel buttons to put onto the home button and solve the issue!
All-in-all this is simply the best screen protector that money can buy and you will not be sorry if you take the plunge!